The F9 utilizes a hybrid design in which each channel is composed of one dynamic and two balanced armature drivers. The 9.2mm dynamic driver is specifically tuned to produce bottomless lows whilst the two balanced armature drivers precisely portray the extended upper-mids and highs.
Like the Fiio F9 SE earphones, the F9 SE utilizes a hybrid design in which each channel is composed of one dynamic and two balanced armature drivers. The 9.2mm dynamic driver is specifically tuned to produce bottomless lows whilst the two balanced armature drivers precisely portray the extended upper-mids and highs.
The new FiiO K5 compatible with the FiiO X1, X3 2nd Gen, X5 2nd Gen and the X7 players and E17K, is the latest docking station from FiiO. Utilizing TI's TPA6120A2 current feedback headphone driver, the K5 utilizes exclusive technology to lower its output impedance to a transparent 1 Ohm and increase its maximum output power to up to 1.5W@32 Ohms. Utilizing an extra current amplification stage and comprising an internal high efficiency, low noise power supply, the K5 has high current output, satisfying highly dynamic program material, and has three gain settings suitable for headphones of different sensitivities.
The AM2 is a replaceable/upgraded amplifier unit that you can use to change the sound quality of your FiiO X7 and is suitable for use with both earbuds and portable headphones.
The output power of AM2 is similar to that of most of high resolution music players on the market (such as FiiO X3 and X5). Compared to the FiiO AM1, the AM2 module has a higher operating voltage.
Equipped with an XMOS USB receiver chip, the K3 is capable of decoding up to 384kHz/32-bit PCM and native DSD256 – the same as many DACs costing much more. The K3’s dual crystal oscillators ensure that any digital audio signa; being fed into the DAC are exactly correct for further enhanced sound quality. Just connect the K3 to your computer via USB to instantly upgrade to high-fidelity sound, and enjoy your music the way it was meant to be heard.
The FH1 features 1 composite polymeric titanium diaphragm dynamic driver, and one Knowles Balanced Armature driver. The dynamic driver works to produce the bottomless lows, and the balanced armature driver works to produce extended upper-mids and highs.
The FH1 features a brass sound tube, helping to produce a more natural sound. The FH1 is also Hi-Res Audio Certified
Thanks to the all-new Qualcomm QCC 3005 Bluetooth chip, the BTR1K is able to support Bluetooth 5.0 and all-new Bluetooth profile as well as various audio codecs, such as the aptX, aptX low latency, SBC and AAC. All of this ensures a stable, high quality Bluetooth audio experience that will bring you closer to how your music was intended to be heard.
The FiiO i1 is an Apple MFi certified, digital-to-analog converter (DAC) and headphone amplifier designed for the Lightning connector. The digital audio signal enters through the Lightning connector end that can be connected to the Apple iPhone/iPod/iPad (and other Apple products), while the analog audio signals are pushed out through the 3.5mm output. The i1 also automatically detects if you are using a standard headphone or one with in-line controls. Just because Apple has ditched the headphone jack doesn't mean you have to ditch your favourite headphones.
Optimus Performance Marketing is a trading name of UK Affiliate Management Ltd Registered in England & Wales, No 05945086 Registered Office – Unit 22, Callywith Gate Industrial Estate, Bodmin, Cornwall, PL31 2RQ