Free Delivery on Orders Over £45 + VAT at ESE Direct
Free Delivery - All orders above £45 (excluding VAT) qualify for Free UK mainland Delivery (excluding HS, KW, ZE, IV, AB, DD, PH, PA, GY, JE, IM, BT, Isle of Anglesey, Isle of Wight and Eire).
Oversized products requiring a crane or hiab offload may be charged for.
Orders below £45 excluding VAT will incur a £4.50 charge (automatically applied to your basket until carriage paid limit reached).
Maximum protection thanks to robust construction by Armorgard.
Both the lower and the upper compartments have 2x full width shelves.
Pockets on doors for smaller components.
Keyed-alike 2 point tamper-proof locking system.
Serial numbered should replacement keys be needed.
Slanted, folding work surface with lockable concealed storage area.
Robust fork-lift skids with pre-drilled holes for castors.
Both sides of top compartment have gas struts.
6 bike or 8 bike capacity.
Use freestanding, or fit into our Traditional Cycle Shelters.
Bikes held upright by slots / hoops that grip wheels.
Mounts by bolting into concrete.
All metal parts powder coated in an attractive dark grey RAL7024 for weather resistance.
Dimensions: 935mm high & 600mm deep.
All welded steel construction - delivered ready to use.
Tough and weatherproof all steel construction.
Galvanised or powder coated finishes.
Combined lock housing and lift handle.
750 x 60mm diameter post.
800mm overall height.
Just 118mm high when folded.
With 4 x 12mm mounting bolts.
Quality padlock included with parking posts.
Folds in either direction to lie horizontally.
620H x 60Dmm post.
Heavy duty cast steel baseplate.
Choice of zinc plated steel or yellow powder coated steel finish.
Spare or extra keys are NOT available.
Replacement locks also NOT available.
Video's demonstrate tarmac fixing.
Tough colour coating for long lasting weather protection.
Stainless steel pivots.
Folds to 80mm above ground.
Integral lock with 2 security keys (spare/extra keys NOT available).
Overall dimensions 720mm high, 700mm wide.
Base plate 170mm x 100mm, 2 x 15mm dia mounting holes.
Choose PCP710Y/CONB for fixing to concrete or PCP710Y/TARB for fixing to tarmac.
Fully welded units manufactured from steel angle & 25 x 25mm weld mesh.
Units have padlock facility on the doors (padlocks not supplied).
Ideal for the security of both hazardous and valuable materials.
Includes fully welded base unlike many other security cages.
Store anything from drums to gas cylinders and much more.
Please note: Delivery will be on a lorry without off-loading. facilities, if you do not have a forklift or other means to off-load, additional charges will apply.
The standard-sized base has a straddle width of 605mm.
The drum can be raised so that the base is at a height of anything up to and including 530mm.
Manual gearbox with a self-sustain feature, which means that the drum can be held at any height.
Polyurethane tyres for moving the trolley around have toe protectors and brakes for safety, and the front of each straddle leg is fitted with a 150mm diameter roller to make manoeuvring easier.
The majority of the frame is coated in an orange finish, with the drum cradle and other small parts in grey.
Each mat contains 30 peel-off layers.
4 mats per pack.
Designed for maintaining clean rooms and meeting laboratory standards.
Anti-microbial adhesive surface removes dirt and dust from anything that makes contact.
Bottom layer adheres to any dry, clean surface.
Overall height 2mm.
Available in 3 colours, white grade is suitable for hospital use.
Bikes stored at twin levels with wheel ramps to upper level.
Single sided rack ideal for parking bikes against a wall.
Twin level storage provides easy access to locks and chains.
'V' shaped parking centre to chain and secure each bike.
Framework and all metal parts are powder coated dark grey as standard.
All metal parts powder coated for weather resistance.
All racks are surface mounted.
Mounted by bolting into concrete.
Optimus Performance Marketing is a trading name of UK Affiliate Management Ltd Registered in England & Wales, No 05945086 Registered Office – Unit 22, Callywith Gate Industrial Estate, Bodmin, Cornwall, PL31 2RQ